Senior Electronic Security Engineer The Company My client AVANZA Intelligent IT & Security is a privately-owned Hertfordshire based IT and Security Company, specialists in integration and large projects.Installing and maintaining IP CCTV, Access Control and Intruder Alarm Systems in London and the surrounding areas.Also providing IT support as a Microsoft Partner to SME’s.My client is looking for an experienced Security Installation & Service Engineer to join the Security Team. Role Involves· Installation, Commissioning of Access Control, IP Surveillance & Intruder Systems· Servicing & fault finding of Access Control, IP Surveillance & Intruder Systems· Carrying out Planned Preventive Maintenances· Technical Phone Support Essential Requirements· Full UK Drivers license· No Criminal Record· Must live within 20 miles of Hertfordshire· Out of Hours Callout may occasionally be required· Prepared to travel around London, Herts and Surrounding areas Qualifications & Skills· Proven experience in service/maintenance & Installation of IP CCTV, Access Control & Intruder Alarm Systems (minimum 3 years)· High Level of relevant security standards (BS5979, BSDD243, BS8418)· Excellent Diagnostic and fault-finding skills with the ability to resolve by elimination or technical recommendations· Advanced PC and LAN/WAN networking skills· Excellent organizational skills· Basic Electrical or Electronic Skills· Excellent command of English language, both written & oral· Prepared to travel and have a flexibility approach to adapt flexible working hours· Has the ability to build strong relationships and be a good team player Package· 45 hours per week (8am – 5pm Monday to Friday) Overtime available· Company Vehicle· Mobile Phone· Laptop· 20 days holiday plus bank holidays· On-going Training· Performance related bonus· Pension· Competitive salary £28,000 - £42,000pa dependent on experience If you are looking for the potential to grow into management within a forward-thinking company forward your CV and covering letter today. Ref CW736 Liability and DisclaimerThe information contained in our advert including any salary or on target earnings information is given in good faith and Clark James Ltd uses all reasonable efforts to ensure that it is accurate. However, Clark James Ltd gives no representation or warranty in respect of such information and all such representations and warranties, whether express or implied, are excluded. No liability is accepted by Clark James Ltd for any loss or damage which may arise out of any person relying on or using any information within this advert.
Clark James are seeking an experienced Multi Skilled Engineer for a leading processing facility in Lincolnshire. Our client are a New Zealand based company with businesses in Australasia, Asia, Europe and Americas. Their Lincolnshire site was established in 1996 and has recently opened a new processing facility at their existing Caistor site, currently employing a skilled workforce of 200. Our client have also become a part of a local group who are specialists in producing the unique and authentic taste of Grimsby Traditional Smoked Fish, the region’s most prestigious delicacy. Being a Multi Skilled Engineer, you will be joining a dynamic and successful Engineering Department, responsible for supporting the production tam in meeting Quality, Cost and Delivery standards by effectively prioritising workloads. Responsibilities and DutiesHealth & SafetyAbide by the company safety policies as contained in the Health & Safety Manual and related documentation Food SafetyWork diligently to ensure any risk from engineering maintenance to product is eliminated EngineeringOperate in a safe manner, minimising risk to self and others at all timesContinually strive to improve engineering standards in the businessAccurately maintain equipment documentation on CMMS (Pirana)Populate and maintain the Technical records, OEM manuals and electrical drawings for the business equipment and facilitiesSupport a lean, effective maintenance strategyIdentify and specify critical spares requirements and author Tasks and Bill of Materials in CMMSResolve breakdowns across site to minimise downtime, analyse root cause and ensure follow on work is completedMonitor equipment performance to improve preventive maintenanceSupport and mentor Production, Hygiene and Logistics staff to maximise use of plant equipmentProactively search out improvement opportunities that will deliver Safety, Quality, Cost, Performance and Reliability benefits for the businessComplete building and services maintenance across all sitesInvolvement with various projects from modification, equipment and buildings installationTo work shifts as necessary to cover the operation as laid out in your working contractFlexible approach to hours, covering all eventualities. Hours to suit business needs Qualifications, Skills & Personal RequirementsEssentialElectrical or Mechanical skilled trainingRecognised trade qualification e.g. NVQ II, ONCExcellent communication skillsExcellent people leadership abilityExperience in FMCG Food Production or similar, particularly metal detection, printing, weighing, heating control, refrigeration and coating linesFlexible approachUsed to working weekends and unsociable hoursExcellent time management DesirableHNC/HND in Electrical or Mechanical Engineering or similarMulti skilled trainingWorking knowledge of PLC, Inverter and process control instrumentsIOSH or NEBOSH trainingExperience of Lean Principles, 5S, CIApprentice trainedFood manufacturing backgroundFood Hygiene CertificateExcellent IT skills with Excel, Spreadsheets, Word, PowerPoint and production support systems Hours [You must Apply on line] and [You must Apply on line] on a weekly rotating basis (½ hour unpaid break)One Saturday shift per month up to a maximum of 8 hours. Liability and DisclaimerThe information contained in our advert including any salary or on target earnings information is given in good faith and Clark James Ltd uses all reasonable efforts to ensure that it is accurate. However, Clark James Ltd gives no representation or warranty in respect of such information and all such representations and warranties, whether express or implied, are excluded. No liability is accepted by Clark James Ltd for any loss or damage which may arise out of any person relying on or using any information within this advert. Please noteAll applications received will be dealt with in the strictest confidence Due to the volume of applications received we will be in touch if your application has been successful within 7 working days. If you have not received any communication within this time, please assume you have been unsuccessful on this occasion, but the information may be retained in connection with future opportunities.
Construction & Property, Engineering, Air Conditioning, Architecture, Asbestos Surveyor
£300 Per Day
An award winning consultancy specialising in the provision of technical services to the London residential building sector now seeks to add an experienced M&E Project Manager with Mechanical Bias. As Project Manager, you will be working on site, being responsible for ensuring that projects are completed on time & to budget. Projects are generally separate to usual day-to-day activities within the business and will require a group of colleagues to work together in order to achieve specific objectives. The Project Manager will oversee the project to ensure the desired results are achieved and the most efficient resources are utilised. Duties of the Project Manager will include, but not be limited to:· Agreeing project objectives· Providing advice on the management of projects· Organising the various professional people working on the project· Carrying out risk assessments and method statements· Making sure that all the aims of the project and programmes are met· Making sure the quality standards are achieved· Using IT systems and site sign in system to keep track of people and progress· Recruiting specialists and sub-contractors· Monitoring sub-contractors to ensure guidelines are maintained· Overseeing the accounting, costing and billing· Attending progress and programme meetings· Liaising with the client as required· Develop and issue programmes as required using Microsoft Project· Identify and capture variations to the main contract· Ensure colleagues undertake their roles efficiently· Issue Technical Submittals in co-operation with the Technical Team· Manage visiting or site based Quantity Surveyor· Prepare and present monthly reviews with Directors· Procure on site labour as required· Liaise with the Buying Department on ordering materials To be considered for the role of Project Manager, you are required to hold at least a HNC in a Building Services related subject, along CSCS Black Managers Card and an SMSTS Health & Safety Certification as a minimum. You will have good mechanical installation knowledge and experience on new build residential high rise projects, including Energy Centres. Ideally you will have a minimum of 7 years’ experience within a project management role, working on projects exceeding £5million in value. Key Skills required for the Project Manager· Knowledge of AutoCAD· IT skills including Word, Excel & Project· Organisational and analytical skills· Communication, interpersonal and team working skills· Commercial awareness· Management and leadership skills with the ability to motivate peopleThis is a contract role for initially 8 months, however could lead to permanent for the right person.Paid at £300 per day Please apply with full up to date CV and contact details. Liability and DisclaimerThe information contained in our advert including any salary or on target earnings information is given in good faith and Clark James Ltd uses all reasonable efforts to ensure that it is accurate. However, Clark James Ltd gives no representation or warranty in respect of such information and all such representations and warranties, whether express or implied, are excluded. No liability is accepted by Clark James Ltd for any loss or damage which may arise out of any person relying on or using any information within this advert. Please noteAll applications received will be dealt with in the strictest confidenceDue to the volume of applications received we will be in touch if your application has been successful within 7 working days. If you have not received any communication within this time, please assume you have been unsuccessful on this occasion, but the information may be retained in connection with future opportunities.
An exciting opportunity exists for an experienced Certification Engineer to join an established team of Engineers operating within a rapidly growing R&D environment. They produce state of the art consumer electronics and are looking for an Electronic Engineer to aid in the design for compliance. This involves helping R&D team to place compliant and competitive products on the market using cost-effective methods.*** We cannot consider applicants who do not already have the right to work in the EU*** The rolePerform and ensure the necessary safety tests and assessments are undertaken to the required time scales and standards.· Develop and maintain an in-house Training Program covering different Low Voltage Directive standards.·Keep the technicians up to date with the latest test procedures and best practices.· Ensure that the design procedures are in place to achieve compliant designs.· Produce safety and conformity plans for new product designs.· Develop and maintain a system that tracks all the assets in the Electrical Laboratory.· Provide traceability of the equipment and sends a reminder when the equipment is due for calibration, thus ensuring our Laboratory remains compliant with ISO 17025.· Involved in performing EMC testing of products.·Emissions and Immunity testing with particular attention to Conducted and Radiated Emissions as well as Harmonics and Inter-Harmonics in the EMC Laboratory.· Provide assistance to customers experiencing issues with the product. In the initial visit to the customer’s installation collect necessary information in order to understand the problem. Replicate the issue and work in a solution.Qualifications, Experience and profile:· Electrical & Electronic Engineer experience of LVD certification.· Degree in Electrical & Electronic Engineering, Physics or similar discipline· Experience of the design and test of electrical or electronic products and/or cubicle based electrical power systems.· An ability to translate/interpret technical standards into realistic requirements for product design and test.· Process savvy with proficiency in management systems
Senior Electronics EngineerOxford£50k - £60k Every day, hundreds of thousands of people go to work and are kept safe by our clients portable gas monitors and fixed gas detectors. Established in 1970, they are known by their worldwide customer base for reliable detection. Their team of over 200 employees is located around the world, the majority of which are based in their Oxfordshire HQ. They have offices in China, America, Singapore, The Netherlands, UAE and India which exist support to our customers and ensure local market insight. There are many technical solutions on the market today engineered from the ground up. At Crowcon, we want to create products that tackle our customer’s problems. In a connected world we want to gather customer insight that will in turn drive our current and future product set. This will set our strategic agenda and drive us towards the Industrial Internet of Things (IIoT). You’ll be leading with us, at the forefront of industry, driving solutions that can demonstrate a real benefit to our customers. The function of this role is to lead a team of engineers to deliver new architectures and products to support the development of connected devices as well as support current products. This position will partner with various teams to perform these activities, however, you will have overall accountability for the hardware implementation to translate the product requirements. Key responsibilities You will be responsible for leading a team of electronic engineers by providing technical ownership and undertaking peer review.You must be able to design both analogue and digital circuitry developing products that meet specification requirements. You must have a proven record to advice and lead the R&D management team of new initiatives and improvements to existing processes and technologies throughout the entire engineering team. QualificationsDegree in a relevant engineering or science disciplineA thorough understanding of low voltage analogue and digital circuit design.Design of Low power & battery powered instrumentationSchematic Capture & PCB Design experienceExperience of design for EMC complianceGeneration and supervision of design verification and production test plans
Position: Global Product Support SpecialistLocation: Hertford, HertfordshireSalary: Competitive + BenefitsThe Company:Our client is on a mission to provide continuous innovation in healthcare technology for better clinical and economic outcomes. Their scalable solutions deliver critical patient data across local and remote systems, enable better-informed decisions, increase efficiencies, and create a safer environment for patients.Why work there? Because lives depend on you!The Global Product Support Specialist Role:The Global Product Support Specialist will provide dedicated technical product support for key products within the Diagnostic Cardiology product group.This position is responsible for ensuring that proper support arrangements are planned, implemented and sustained for all products assigned to them. Also expected to behave in a way to enhance the Company’s reputation for providing ‘caring, effective, long-term product after sales support’.Key Responsibilities of the Global Product Support Specialist:Resolve calls or e-mails escalated from a first Line or triage team providing a second tier of expert product specific support for technical product issues not resolved by the 1st line or triage teamValidate product specific complaints – establishing that any complaint received is not caused by user error, configuration error, out-dated software or one-off failure of a Field Replaceable UnitRecommending appropriate additional trouble shooting steps. Gathering and qualifying required dataAssist with field investigations and installations providing expert on-site support for field staff when necessary to fulfil above responsibilitiesDevelop and implement custom product configurations utilising the configurability of their products to provide custom solutions for customersEscalate issues that cannot be resolved by service typically to R&D, Operations departments having previously completed all above steps. Facilitating the smooth transition of such issues to either departmentAssist with management of corrective actions and provide expert assistance and recommend scheduling proposals to the Global Tech Support manager responsible for these actionsValidate the adequacy and suitability of service manuals prior to releaseWrite technical bulletins – create and ensure appropriate distribution of all documents detailing changes to products’ technical specification or servicing arrangements or facilitating Corrective Action programsCreate technical training course material producing all training materials required to teach suitably qualified technical students to: (1) Operate the equipment (2) Meet Preventive maintenance requirements (3) Provide Corrective Maintenance (4) Design and complete an InstallationProvide expert assistance to the Global Service Organization and distributors when planning installations of an unusually complex natureRepresent service in the new product development process ensuring that NPD process’ service requirements are fully met and to properly promote Global Service Organization’s requirementsUphold the company’s core values of Integrity, Innovation, Accountability, and TeamworkSkills and Experience Required:A Biomedical Engineering degree or equivalentProficiency with Windows and Microsoft OfficeTechnical Support experience in a Medical fieldPrevious experience providing international Technical Support is desirablePrevious experience as a hospital BioMed is desirableA basic knowledge of any other languages is desirable (but not essential), in particular Spanish, French, German, or ItalianIn return, the Global Product Support Specialist can expect a competitive salary and benefits package, which includes a generous holiday package and company pension scheme.What’s Next?If you are interested in this Global Product Support Specialist position, simply submit your CV via the button shown.PLEASE NOTE:Candidates that do not receive a response within 21 days should assume that their application has been unsuccessful on this occasionOnly candidates eligible to work in the UK will be consideredNo AgenciesKeywords: Software support, Databases, Imagination sympathy, Biomed, Technical Support, Customer support, Attention to detail, Diagnostic, Medical, Training, HertfordThis vacancy is being advertised by Net-Recruit.
Position: BPI Field Service EngineerLocation: Hounslow (Heathrow Airport)Salary: Competitive + BenefitsThe Company:Our client is an industry leader in detection technology, providing cargo and vehicle inspection systems and services for ports, borders, military, high-threat facilities, and checkpoints to help customers combat terrorism, drug smuggling, illegal immigration, and trade fraud. They offer a broad array of scanning system configurations that leverage low-, medium-, and high-energy X-ray technology—or multiple X-ray technologies—to address each customer’s unique security application requirements.Due to their continued success, they now have a fantastic opportunity for a Field Service Engineer to join the organisation.The Field Service Engineer Role:As the Field Service Engineer, you will be responsible for the installation, repair and maintenance support of the full range of their product’s in the UK & EMEA.Key Responsibilities of the Field Service Engineer:Installation of the full range of the Company’s equipment at customer premises in the UK and EMEARoutine preventative and breakdown maintenance of the Company’s equipment at customer premises in the UK and EMEAProvide out of hours standby cover as part of established teamsCarry out basic Operator and Technical training when required at customer premisesCarry out site surveys and advise customer on technical matters prior to installationsLearn the basics of HBS products so assistance can be given to other teamsUphold the Company’s core values of Integrity, Innovation, Accountability, and TeamworkSkills and Experience Required:Previous working in a customer facing environment would be beneficialElectronics and Computer experience essential, along with working knowledge of Microsoft office related programsElectronics and computer knowledgeMust have qualifications in subjects relevant to the roleIn return, the Field Service Engineer can expect a competitive salary and benefits package, which includes a generous holiday package and company pension scheme.What’s Next?If you are interested in this Field Service Engineer position, simply submit your CV via the button shown.PLEASE NOTE:Candidates that do not receive a response within 21 days should assume that their application has been unsuccessful on this occasionOnly candidates eligible to work in the UK will be consideredNo AgenciesKeywords: Electronic, Electrical, Field Service Engineer, Mechanical, X-ray, Systems, Customer service, Customer relations, Hounslow, Twickenham, Bracknell, Slough, HeathrowThis vacancy is being advertised by Net-Recruit.
Position: Manufacturing Engineer Location: St Neots, CambridgeshireSalary: £25,000 - £34,000 (Dependent on Experience) The Company: OSI Systems have a long history of developing innovative solutions to bring a better quality of life to the world. Their OSI Electronics division is a diversified manufacturer of electronic devices and value-added manufacturing services. They provide customers with the manufacturing capabilities and purchasing power of a global Electronics Manufacturing Services provider. They deliver regional and personalized support best provided by a smaller company, striving to build lasting relationships and create close and valued partnerships with their customers. The Manufacturing Engineer Role: This is an exciting opportunity for an experienced Manufacturing Engineer to join a friendly and hardworking team within a successful growing company. The Manufacturing Engineer will manage new product introduction and provide production support engineering for a specific product or group of products to meet customer design specifications. You will also develop and sustain process improvements to reduce production cost and increase yield. Key Responsibilities of the Manufacturing Engineer:
Converting customers’ requirements into internal format and the translation of build data onto the company ERP system (BOMs and Routes)Create assembly instructionsManage the engineering change processSupport production team with process and quality issuesImplement process improvements were justified, provide design support to customers and assist with quotes.Customer liaison to aid the customer with DFM and to verify build requirementsAssitance with quotationsNew Product IntroductionProduction SupportQuality SupportBasic Design SupportAssist with equipment and services maintenanceSome travel to other sites, to customers, suppliers or equipment manufactures
Skills & Experience Required:
Educated to minimum ONC/A Level in physics, electronics or related discipline. High-grade GCSE’s or equivalent in Technology or IT, Maths and English. Proven experience in a similar role within an electronics manufacturing environment; proven experience in a similar role within an electronics manufacturing environmentElectronics component knowledge to enable proficient selection of components during the creation of a bill of materialsKnowledge of SMT, through-hole and mechanical assembly processes sufficiently to be able to produce documentation for a full turnkey productExperience of manufacturing equipment used in the assembly PCBAs SMT Placement machines, AOI, Selective / Wave soldering etcExperience of designing assembly jigs and fixturesFamiliarity with IPC-A-610 assembly standardsAwareness of design for manufacture for electro-mechanical assembliesAwareness of circuit board test processes and APQP techniques such as FMEAIdeally experienced in use of ERP systems, illustration software, mechanical CAD systems, MS Access, MS Project, GC Prevue and data analysis toolsStrong MS Outlook, Word and Excel skills
What’s Next? So what are you waiting for? If you are interested in this Manufacturing Engineer position, simply apply via the button shown. Candidates that do not receive a response within 21 days should assume that their application has been unsuccessful on this occasion. Keywords: Manufacturing Engineer, Physics, Electronics, Electrical, Component, SMT, Design Engineer, Electro-mechanical, ERP, CAD, St Neots, Cambridge This vacancy is being advertised by Net-Recruit.
Position: Mechanical Assembler/FitterLocation: Chester, CheshireSalary: £18,000 - £21,000 + BenefitsThe Company:Renby Ltd is the sole UK agent for the industry leading Schrage Rohrkettensystem GmbH range of conveyors, and have developed their own range of fogging systems, that have a broad range of uses in industry ranging from food packing, biomass handling, through to zoos and leading sculptors.Based in a rural location, Renby Ltd operates from a converted water mill which was built almost 200 years ago.Due to their continued success, they now have a fantastic opportunity for an experienced Mechanical Assembler/Fitter to join them. The Mechanical Assembler/Fitter Role:As the Mechanical Assembler/Fitter, you will be responsible for the assembly and fault finding of high pressure pump units using threaded parts and inserts. You will also be expected to manage the stock control system for mechanical parts. The Mechanical Assembler/Fitter will be in control of placing orders with suppliers, documentation, and picking & packing orders for customers. The role is both office and workshop based. On occasion, there will be the requirement to work on customer’s sites throughout the UK.Key Responsibilities of the Mechanical Assembler/Fitter:
Assemble high pressure pumps and associated components for each systemUse of hand tools, rivet tools and insert toolsTest systems, troubleshoot and sign offCommissioning of equipmentPick and select components for assembly and despatchWorking from engineering drawings and assembly manualsVisual inspection of partsBasic Stock ControlSupplier OrdersSupplier ManagementGeneral housekeeping duties in the workshopCompliance with requirements of a Management of Health and Safety systemMaintain Product Documentation
Skills & Experience Required:
Mechanically trained, minimum completed apprenticeship, preferred HNC / HNDAt least 5 GCSEs or equivalent; including Maths and English. Good Science qualification desirable. IT skills a mustCompetent with Microsoft Office – Word / Excel / PowerpointCAD ExperienceElectrical skills an advantageDesire to learn, with the ability to problem solveFull driving licence
In return, the Mechanical Assembler/Fitter can expect;
Competitive salary - £18,000 - £21,000 Dependent on ExperiencePension PlanExcellent training provided where requiredFantastic working environment
What’s Next?If you are interested in this Mechanical Assembler/Fitter position, simply submit your CV via the button shown. PLEASE NOTE: The closing date for applications is Monday 5th March, so apply now and make sure you don’t miss out on this brilliant opportunity. Keywords: Mechanical Assembler, Mechanical Fitter, Mechanical Engineer, Electrical Engineer, Electronics, CAD, Component, Workshop, Technician, Chester, Liverpool, Cheshire, Merseyside This vacancy is being advertised by Net-Recruit.
Position: Test & Engineering ManagerLocation: St Neots, CambridgeshireSalary: £40,000 - £60,000 DOE + BenefitsThe Company:OSI Systems companies have a long history of developing innovative solutions to bring a better quality of life to the world. The OSI Electronics division is a diversified manufacturer of electronic devices and value-added manufacturing services. They provide their customers with the manufacturing capabilities and purchasing power of a global Electronics Manufacturing Services provider. Due to their continued growth, they are now looking for a Test & Engineering Manager to join them.The Test & Engineering Manager Role:The Test and Engineering Manager will provide management direction of all phases of in-house/outsourced manufacturing for a product (or product line) from new product introduction to completion. You will function as the principal lead with design, manufacturing, quality and test as the product(s) move to completion and distribution. The Test & Engineering Manager will also ensure defined production and test processes and documentation will result in products shipped that conform to customer specifications and quality goals. Key Responsibilities of the Test & Engineering Manager:
Provide leadership and direction to the engineering and test teams, coordinating and directing projects, making detailed SMART plans to accomplish company objectives, goals, processes and direct the integration of all technical activitiesTake responsibility for the NPI process including establishing priorities and ensuring deadlines are met for production schedulesManage Test & Test Solutions team ensuring the delivery of test procedures and test equipment meet the customer’s requirements. Take part in face to face meeting with customers at the start and during the development of a test solutionProvide stage gate introduction of product(s) for all NPI’s and ensure feedback is appropriately acted and reported uponCarry out all elements of the NPI process when acting as principal lead on particular projects. Act swiftly to changes and implement those changes accordinglyResponsible for the Engineering Change process including establishing priorities and ensuring deadlines are met for production schedules, along with undertaking all relevant processes whilst acting quickly to any required changesOversee the process engineering function and establish process priorities for the engineers in conjunction production.Oversee all elements of Production Test, including ownership of the deskilled processesAssist, monitor and mentor all engineers & test technicians in all projects and work priorities to achieve required deadlines, ensuring that full accountability is maintained Identify key products and core customers where efficiencies can justifiably be improved and ensure all engineering & test personnel understand and achieve their cost saving targetsProvide engineering & test support to customers as and when required, ensuring accurate record keeping of time spent is recorded (whether chargeable or not)Assist Commercial with quotations by providing accurate and considered assembly times along with detailed NRE requirementsAttend Management and customer meetings as required and provide reports as requested
Skills & Experience Required:
Ideally educated to HND, BSc level or above preferably with a Mechanical, Electrical or Electronic Engineering degree or a highly demonstrable engineering/technical backgroundProven ability to fault find down to component level on printed circuit assembliesProven experience of electronic/electro-mechanical manufacturing with a technical understanding and working knowledge of PCBA manufacturing and testProven ability to read and understand manufacturing data, circuit diagrams and mechanical drawingsProven experience in external and internal customer engagementExperience of project management in a manufacturing environmentAbility to lead and manage a team of engineers & test techniciansStrong MS Office skills
In return, the Test & Engineering Manager can expect;
Excellent salary, £40,000 - £60,000 (Dependent on Experience)Pension planFantastic career opportunities
What’s Next?If you are interested in this Test & Engineering Manager position, simply submit your CV via the button shown.PLEASE NOTE:
Candidates that do not receive a response within 21 days should assume that their application has been unsuccessful on this occasionOnly candidates eligible to work in the UK will be consideredNo Agencies
Keywords: Test & Engineering Manager, Engineering, Mechanical, Electrical, Electronics, PCB, Component, Manufacturing, Technician, St Neots, Cambridge This vacancy is being advertised by Net-Recruit.