Electrical - Labview Development Engineer - Didcot (Oxfordshire)
Salary: Very Competitive
Key words: Equipment, Development Engineer, Equipment Development Engineer, Engineer, Labview, Electrical Engineering, Software improvement, medical machines
Our client is looking to appoint a bright, “hands-on” Electrical - Labview Development Engineer as soon as possible to develop and test software improvements, for new functions and new variants of our client's medical machine.
The machine uses Labview to control and monitor, electrical and mechanical components e.g. Heaters, Voltages, load cells, imaging system, vacuum system, motorized stage movement as well as interfacing new robot loader with our Client's machine.
* Must be a qualified degree level engineer or HNC related experience, in an Electrical, Elctronics Engineering development role
* Must have at least 3 years industrial experience
* A Certified LabVIEW Developer with extensive experience and qualifications
* Comfortable being part of a team, getting involved and helping out as required, but also able to work without close supervision. Flexibility.
Additional Resources are an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies - Employment Businesses Regulations 2003.
UNDERSTANDING, SERVICE, TRUST 3 Words that Guarantee Results in Recruitment AV Technical ManagerBirmingham Circa £45,000 +Car allowance One of Europe's pre eminent providers of integrated audio visual communication systems with a pedigree covering more than 30 years of continued growth and success in the audio visual communications market place. A leading specialist in the design, supply and installation of integrated av systems with experience, expertise and market leading technical ability they provide solutions to clients which are designed and delivered on schedule and within budget with an uncompromising commitment to excellence in engineering and technical support. Due to continued support are seeking an AV Technical Manager with in-depth knowledge of AV stems integration to work with the team from Request for proposal to conclusion of projects. the ideal candidate will have previous experience in Management in AV The role : RFP Phase - Support the team as required, for development of technical tender docs * Attendance at internal/external meetings and interviews if required Preconstruction Phase - Attendance at all pre-construction workshops * Development and delivery of the workshop output back into the teams * Development and submission of technical submittals, managed through to conclusion * Conduct internal meetings as required, to deliver the design requirement to colleagues/depts * Manage any design queries from proAV design dept / coordinate external Q&A process, as required * Review all proAV drawings upon completion, manage changes as/if required, and ensure full accuracy of drawing pack prior to submitting externally Change Control - Manage design changes throughout the life cycle of the project * Work closely with the Consultant on his change requirements * Run RFI/query process * Deliver these changes internally to Design Dept * Manage and check drawings updates, in line with these changes, prior to issue * Check the approved changes are delivered, known and understood across all proAV departments & individuals * Design (drawings) * Procurement (working copy) * Production (design) * Programmer (code and GUI) * AV/UC engineer (technical docs) * Rack Build & Test Phase -Work with Production to ensure the rack build and test process is completed in line with the project programme * Check the Programmer is developing the code in accordance with the latest design, and the project timelineCheck all changes have been captured and incorporated into the build * Oversee all pre-staging tests, to ensure the racks are complete and ready for consultant witness testing * Attendance at witness testing * IT/UC-Work with the appointed AV/UC engineer to progress all requirements * Track document production (HLDs and IT interface schedule) * Oversee associated proAV and client team activities, to help ensure timely completion of respective responsibilities Commissioning - Attendance on site for testing, commissioning and handover O&M - Working with Design department on the development of O&M documentation * Checking all changes have been incorporated * Check accuracy of all information Benefits:* 3% pension contribution (after 3 months probation period) * 23 days holiday in first year (holiday years rising after length of service January to December) to 25 during 3rd year * Death in service benefits (3 x annual salary) * Private medical insurance (after 3 months probation period) * Free parking * Free tea, coffee etc * Join a company who will value you
The Company and the Role:The Company is a materials handling equipment company whose operations cover a territory which can best be described as Central Southern England.They sell, hire and maintain new and used engine and electric powered forklifts and warehouse equipment as well as telescopic handlers and high level access equipment and supply every conceivable type of business from Warehouse and Distribution to Manufacturers and Service businesses.Due to their continued growth, the Company is now seeking to employ an additional Field Service Engineer to service and maintain MHE and ancillary plant equipment in North Hampshire. This is a permanent position.You will provide consistent high standards in the provision of field-based maintenance and repair service on customers' forklifts, telehandlers, access equipment and associated equipment and other hired machinery supplied by the Company, within a designated area. Key Features of the Role:* Maintain the company image, be polite and courteous to all customers. Keep service van and uniform clean. Always attend site well presented to project a professional image.* Fulfil all statutory and company requirements with regard to Health and Safety and adhere to all customer site requirements.* Attend training courses when directed.* Complete all paperwork (hard copy or electronic) with the relevant and required information and within the specified timescale using all support including IT as necessary. This will include clear identification of part numbers, order numbers, times and dates, recommended further action and customer commentary.* Utilise all available support to effect fast and efficient diagnosis and repair.* Maintain van stock levels to maximise efficiency and communicate additional requirements in a clear manner to the Parts Department or other support staff.* Maintain regular contact and an effective working relationship with the Field Service Team Leader making yourself available to him for site meetings as required.* Keep the Customer Support Office updated with progress and notify them of potential problems with customers and their future requirements in a timely manner, using appropriate methods e.g. email, telephone.* Keep the customer informed about the progress of the repair and any follow-up work required using Customer Support staff as back up and continuity.Knowledge and Skills:To be considered for the role you will need to be an accomplished Service Engineer with your practical experience supported by a recognised related industry Apprenticeship / Armed Forces training.You will ideally live in Basingstoke or north of Basingstoke or close to the Hampshire / Berkshire / Surrey borders.Ideally you will have a proven number of years' experience in the Fork Lift industry or similar industries e.g. HGB and Plant etc but if not then you must have demonstrable knowledge of: Mechanical systems; Internal combustion engines; Transmission systems; Modern electronic control systems; Hydraulics; Electric motors (ac & dc technology).You will be proficient in fault finding and repair.You will have the ability to work independently and in a team.You must have good communication skills, oral and written.You must be able to work to a high standard and to timescales as required.You will have experience of and a good understanding of Health & Safety requirements working in a workshop practice.You will have a strong commitment to continuing personal and professional development.You will have excellent organisational skills, be resourceful and solution focused.You will display a high standard of accuracy and attention to detail.You will be able to multi‐task, prioritising workloads to work to tight deadlines.You should be flexible in your approach and able to cope with the diverse needs of the post.You will be someone who is highly motivated and possessing a resilience to work under pressure, positive, personable and optimistic with a can-do attitude.You should be IT/ PC literate and have a full UK Drivers Licence. Ideally you will have your own set of tools.Our Client is supportive to the ex-military community and therefore applications are welcome from ex-military personnel who have an electrical and / or mechanical engineering background.You will work from home and the working hours are Monday to Friday, 08:00am to 16:30pm, but flexibility is required in order to finish any job on time. Overtime is available and there is a requirement to be available for call outs.What's on Offer:A basic salary circa £28k plus bonuses for team bonus and van cleanliness plus overtime payments and call out payments which means that you can expect to earn around £36-38k per annum.A fully serviced company van with tools is provided and the current Field Engineer vehicle is a Ford Transit style.In addition, there is holiday entitlement which commences at 22 days rising to 28 days plus bank and public holidays plus other benefits of Pension, Life Insurance, Personal Accident Scheme, Westfield Healthcare, free Uniform / overalls and overall cleaning, Subsidised Will Scheme, Cycle to Work Scheme and Give as you Earn Scheme (GAYE).Please do not apply for this vacancy unless you are an experienced Field Service Engineer.4exMilitary receives an overwhelming number of CV's /Resumes each day, and each one is reviewed personally by a Consultant. Our pre-selection process is very thorough in order to meet the specific requirements of our clients.If your details meet the criteria set by our client, then we will contact you regarding the position. If you are not contacted by us, then please assume that your application has not been successful on this occasion. However, we will keep your details on file and should another suitable or matching vacancy become available then we will contact you.
Reference: TSLMC0199 Vacancy: Sales Engineer Location: Todmorden, close to Rochdale Salary: £26,000-£35,000, dependent on experience Benefits: Company Car Seat Ateca SE Tech + Pension Hours: Full time, Monday-Friday Closing Date for Applications: 19th June 2018 The Company: Our client are specialist distributors of electrical components such as automotive relays, rocker switches, circuit breakers, vehicle lighting, microswitches, inductive sensors, Atex limit switches, safety interlock switches, fans and industrial relays. They sell to a wide range of industries such as specialist vehicle manufacturers, machinery manufacturers, factories and wholesalers. A vacancy has arisen for a Sales Engineer to join the team based in Todmorden, close to Rochdale. The Role: As a Sales Engineer, you will be responsible for visiting potential and existing customers to generate new business. Customers are located throughout the whole of the UK and you would be expected to cover the whole country staying away overnight from time to time. The customer base is focused on the north so candidates based for the office in Todmorden or from their home in the North West, Yorkshire, or Midlands would be ideally placed. Key Roles & Responsibilities:
Visiting potential customers to generate new businessVisiting and maintaining contact with existing customersCover internal salesLiaise with suppliers for technical and commercial informationRecommend and organise marketing campaignsMonitor and follow up enquiriesMaintain mail lists
The Candidate: Whilst product training will be given for the Sales Engineer role, candidates must have a good general knowledge of electrical components, preferably with a qualification in electronics or electrical engineering. Prior experience in a technical sales or business development role would be an advantage. Essential Candidate Criteria:
Good understanding of electrical componentsSome prior technical sales experienceFull driving licenceExcellent communication skills
Desirable Candidate Criteria:
Some form of electrical training/knowledge e.g. HND Electrical/Electronic Engineering / Apprenticeship / similar
Are you the Sales Engineer that we are looking for based in Todmorden, close to Rochdale? If YES, then hit the 'Apply' button now where you will be asked to complete a short questionnaire and attach your CV for review.
The Company and the Role:Never a dull day with this flourishing family business that is growing and becoming dominant within their region. With new customers coming on board all the time the existing team of 4 FLT Engineers have had to shuffle creating the opportunity for a replacement field Fork Lift Truck Engineer.The Company provides all types of fork lift trucks whether selling, leasing or refurbishing plus the accessories that go with the vehicles.You will be given a maintenance van, tools and a mobile 'phone with direction from the MD who will also be your line manager.Based at their headquarters and depot within central Cambridgeshire, you will be travelling to and from their customers' sites within the whole of the county and sometimes further afield.Some of the newer customers are outside the county boundary confirming the exciting growth that is enabling the company to blossom.Key Features of the Role:As a Fork Lift Truck Engineer, you will be required to service, maintain and refurbish all parts of their comprehensive range of Fork Lift trucks.Working with their customer base you will represent the Company, in the field, and be required to provide the full support expected by their network.The role is field based, primarily within Cambridgeshire. You will be given top up training if required and the necessary tools to carry out the role.Knowledge and Skills:You will ideally be an accomplished Fork Lift Truck Engineer, preferably trained with: gas, diesel and electric engines.You will be required to diagnose and repair trucks quickly and efficiently and therefore should have good diagnostic skills.The main requirement is to have a thorough knowledge of diesel engines and a minimum understanding of the gas and electric engines.Some in house training will be available for the gas and electric engines if required.The role will involve going to the customers' sites, therefore a full driving licence will be essential.What's on Offer:£10.00 - £14.50 per hour dependent on experience. In addition, a company van, mobile 'phone, tools will be supplied. There will be occasional overtime.Please do not apply for this vacancy unless you are an experienced with Fork Lift Truck diesel engines.4exMilitary receives an overwhelming number of CV's /Resumes each day, and each one is reviewed personally by a Consultant. Our pre-selection process is very thorough in order to meet the specific requirements of our clients.If your details meet the criteria set by our client, then we will contact you regarding the position. If you are not contacted by us, then please assume that your application has not been successful on this occasion. However, we will keep your details on file and should another suitable or matching vacancy become available then we will contact you.We highly recommend you "Like" or "Follow" our social media pages (Facebook, Twitter etc) as we post all our vacancies through notifications and you may find an alternative vacancy that is suitable.4exMilitary Jobs Ltd is at the forefront of supplying military leavers and ex-military personnel working in logistics and supply chain, facilities management, catering, hospitality and life support services, military and defence support services, aviation and aerospace, IT and telecoms, fuel supply and distribution, security, retail, wholesale and PX, QA / QC and food safety, health and safety, HR, training and instructors, wealth management, engineering and construction, naval, port and marine- Worldwide!We frequently manage confidential appointments on behalf of our clients, many of which are not advertised.If you are about to leave the Armed Forces or are ex-military seeking to develop your career, please do not hesitate to contact us for a confidential discussion and access to our complete portfolio of current opportunities.
Clark James are seeking an experienced Multi Skilled Engineer for a leading processing facility in Lincolnshire. Our client are a New Zealand based company with businesses in Australasia, Asia, Europe and Americas. Their Lincolnshire site was established in 1996 and has recently opened a new processing facility at their existing Caistor site, currently employing a skilled workforce of 200. Our client have also become a part of a local group who are specialists in producing the unique and authentic taste of Grimsby Traditional Smoked Fish, the region’s most prestigious delicacy. Being a Multi Skilled Engineer, you will be joining a dynamic and successful Engineering Department, responsible for supporting the production tam in meeting Quality, Cost and Delivery standards by effectively prioritising workloads. Responsibilities and DutiesHealth & SafetyAbide by the company safety policies as contained in the Health & Safety Manual and related documentation Food SafetyWork diligently to ensure any risk from engineering maintenance to product is eliminated EngineeringOperate in a safe manner, minimising risk to self and others at all timesContinually strive to improve engineering standards in the businessAccurately maintain equipment documentation on CMMS (Pirana)Populate and maintain the Technical records, OEM manuals and electrical drawings for the business equipment and facilitiesSupport a lean, effective maintenance strategyIdentify and specify critical spares requirements and author Tasks and Bill of Materials in CMMSResolve breakdowns across site to minimise downtime, analyse root cause and ensure follow on work is completedMonitor equipment performance to improve preventive maintenanceSupport and mentor Production, Hygiene and Logistics staff to maximise use of plant equipmentProactively search out improvement opportunities that will deliver Safety, Quality, Cost, Performance and Reliability benefits for the businessComplete building and services maintenance across all sitesInvolvement with various projects from modification, equipment and buildings installationTo work shifts as necessary to cover the operation as laid out in your working contractFlexible approach to hours, covering all eventualities. Hours to suit business needs Qualifications, Skills & Personal RequirementsEssentialElectrical or Mechanical skilled trainingRecognised trade qualification e.g. NVQ II, ONCExcellent communication skillsExcellent people leadership abilityExperience in FMCG Food Production or similar, particularly metal detection, printing, weighing, heating control, refrigeration and coating linesFlexible approachUsed to working weekends and unsociable hoursExcellent time management DesirableHNC/HND in Electrical or Mechanical Engineering or similarMulti skilled trainingWorking knowledge of PLC, Inverter and process control instrumentsIOSH or NEBOSH trainingExperience of Lean Principles, 5S, CIApprentice trainedFood manufacturing backgroundFood Hygiene CertificateExcellent IT skills with Excel, Spreadsheets, Word, PowerPoint and production support systems Hours [You must Apply on line] and [You must Apply on line] on a weekly rotating basis (½ hour unpaid break)One Saturday shift per month up to a maximum of 8 hours. Liability and DisclaimerThe information contained in our advert including any salary or on target earnings information is given in good faith and Clark James Ltd uses all reasonable efforts to ensure that it is accurate. However, Clark James Ltd gives no representation or warranty in respect of such information and all such representations and warranties, whether express or implied, are excluded. No liability is accepted by Clark James Ltd for any loss or damage which may arise out of any person relying on or using any information within this advert. Please noteAll applications received will be dealt with in the strictest confidence Due to the volume of applications received we will be in touch if your application has been successful within 7 working days. If you have not received any communication within this time, please assume you have been unsuccessful on this occasion, but the information may be retained in connection with future opportunities.
Construction & Property, Engineering, Air Conditioning, Architecture, Asbestos Surveyor
£300 Per Day
An award winning consultancy specialising in the provision of technical services to the London residential building sector now seeks to add an experienced M&E Project Manager with Mechanical Bias. As Project Manager, you will be working on site, being responsible for ensuring that projects are completed on time & to budget. Projects are generally separate to usual day-to-day activities within the business and will require a group of colleagues to work together in order to achieve specific objectives. The Project Manager will oversee the project to ensure the desired results are achieved and the most efficient resources are utilised. Duties of the Project Manager will include, but not be limited to:· Agreeing project objectives· Providing advice on the management of projects· Organising the various professional people working on the project· Carrying out risk assessments and method statements· Making sure that all the aims of the project and programmes are met· Making sure the quality standards are achieved· Using IT systems and site sign in system to keep track of people and progress· Recruiting specialists and sub-contractors· Monitoring sub-contractors to ensure guidelines are maintained· Overseeing the accounting, costing and billing· Attending progress and programme meetings· Liaising with the client as required· Develop and issue programmes as required using Microsoft Project· Identify and capture variations to the main contract· Ensure colleagues undertake their roles efficiently· Issue Technical Submittals in co-operation with the Technical Team· Manage visiting or site based Quantity Surveyor· Prepare and present monthly reviews with Directors· Procure on site labour as required· Liaise with the Buying Department on ordering materials To be considered for the role of Project Manager, you are required to hold at least a HNC in a Building Services related subject, along CSCS Black Managers Card and an SMSTS Health & Safety Certification as a minimum. You will have good mechanical installation knowledge and experience on new build residential high rise projects, including Energy Centres. Ideally you will have a minimum of 7 years’ experience within a project management role, working on projects exceeding £5million in value. Key Skills required for the Project Manager· Knowledge of AutoCAD· IT skills including Word, Excel & Project· Organisational and analytical skills· Communication, interpersonal and team working skills· Commercial awareness· Management and leadership skills with the ability to motivate peopleThis is a contract role for initially 8 months, however could lead to permanent for the right person.Paid at £300 per day Please apply with full up to date CV and contact details. Liability and DisclaimerThe information contained in our advert including any salary or on target earnings information is given in good faith and Clark James Ltd uses all reasonable efforts to ensure that it is accurate. However, Clark James Ltd gives no representation or warranty in respect of such information and all such representations and warranties, whether express or implied, are excluded. No liability is accepted by Clark James Ltd for any loss or damage which may arise out of any person relying on or using any information within this advert. Please noteAll applications received will be dealt with in the strictest confidenceDue to the volume of applications received we will be in touch if your application has been successful within 7 working days. If you have not received any communication within this time, please assume you have been unsuccessful on this occasion, but the information may be retained in connection with future opportunities.
Construction & Property, Engineering, Site Engineer, Trades & Labour, Other Engineering
Pipefitters My client is an Olaer Fawcett Christie Hydraulics authorised service centre based in Hull.My client is looking to recruit experienced Pipefitters to join their team.The role:· Use saws, cutting torches, and pipe benders to cut and hammer pipes to specification· Use of power and hand tools· Study blueprint and construction plans for pipe systems, supports, and related equipment· Assemble and secure pipes, tubes, and fittings by means of welding, brazing, soldering and cementing of joints· Make rough rigs to fabricate new pipes to fit into existing systems· Utilize pressure gauges and hydrostatic testing to inspect and test installed pipe systems· Fix pipework onto walls and steel structures· Select pipe types, sizes and quantity required for a pipefitting project The person:· Be experienced within pipefitting· Confident in installing, maintaining and repairing pipe systems· Be physically fit· Troubleshooting skills· Able to read blueprint and construction plans· Able to work to tight deadlines· Hold a valid CSCS card Apply with your current CV and covering letter today.REF CW754A Liability and DisclaimerThe information contained in our advert including any salary or on target earnings information is given in good faith and Clark James Ltd uses all reasonable efforts to ensure that it is accurate. However, Clark James Ltd gives no representation or warranty in respect of such information and all such representations and warranties, whether express or implied, are excluded. No liability is accepted by Clark James Ltd for any loss or damage which may arise out of any person relying on or using any information within this advert.
Mechanical Fitter My client is an established hydraulic engineering company based in Hull.My client is looking to recruit an experienced Mechanical Fitter to join their team.The role:· Dismantling, repair and assembly of small to medium sized mechanical devices.· Set up and adjust machines and equipment to suit the job· Use of power tools and hand tools.The person:· Strong mechanical background (Hydraulic experience desirable)· Good hand to eye coordination· Practical ability· Attention to detail· Physically fit· Able to work to tight deadlines· Hold a valid CSCS card Apply for this role with your current CV and covering letter.REF CW754B Liability and DisclaimerThe information contained in our advert including any salary or on target earnings information is given in good faith and Clark James Ltd uses all reasonable efforts to ensure that it is accurate. However, Clark James Ltd gives no representation or warranty in respect of such information and all such representations and warranties, whether express or implied, are excluded. No liability is accepted by Clark James Ltd for any loss or damage which may arise out of any person relying on or using any information within this advert.
An exciting opportunity has arisen to join a well established, fast expanding and multi-disciplinary Engineering practice. The team provide excellent quality and cutting edge services across civil, structural and infrastructure schemes. They are also well known for their involvement in a wide variety of projects including green energy. They are now looking to recruit an experienced Project Structural Engineer to join their friendly team. The ideal candidate for this role will have extensive UK structural design experience with a wide variety of projects and ideally be Chartered or nearing this status. Duties will include;- * Managing projects and supervising staff outputs * Preparing design programmes showing proposed delivery for discussion and agreements with the client and other design team members * Developing structural engineering designs and preparing design calculations in steel, concrete, timber and masonry * Identifying project risk * Supporting graduate engineers in their career development A clean driving licence and use of a car is essential for this opportunity.